ENGINE TACHOMETER ET-100
Brief overview
Engine Tachometer is a device with F/V conversion output, which can measure signals that include vibration picked up from a spark plug cable and even DC offset signals.
Engine Tachometer can be used as a pulse shaper. Because Engine
Tachometer has a 12V power supply for a sensor, a photoelectric sensor or other sensors that require electrical supply can be used without preparing a separate power supply.
The display shows the signal count per revolution by the r/min, for instance by setting the number of gear teeth.
Features
● Automatically display by the r/min by setting the number of pulse per revolution
● Analog output (F/V conversion output) proportional to revolution speed
● Wave shaping pulse output for input signals. Output pulse of 1 or 1/2 frequency per revolution.
● The display accuracy is ±100 ppm ±1 digit. ±0.1% F.S for analog output (F/V conversion output). High accuracy.
Specification
Digital display: 0 to 99999 r/min
Input signal: Voltage pulse (pressure resistance ±30V)
Pulse output: 2
Analog F/V conversion output: 10V
Power supply: DC 9V to 32V
ET-100_110425.PDF(951KByte)